Basic Info.
After-sales Service
on Site
Product Type
Granulating Extruder
Assembly Structure
Integral Type Extruder
Engagement System
Full Intermeshing
Transport Package
Wooden Case
Product Description
Double-piston Continuous Screen Changer
Product Description
A perfect flow continuity even at high working pressure.
With the innovative continuous flow screen changer, the construction complexity is reduced to a minimum and the material quality is guaranteed. The new sealing system allows its use also on extrusion lines working with very high pressure levels. After successfully testing on flat sheet and pipes extrusion lines, with strand dies and under water pelletizers, and hot melt coating, this continuous technology has been more recently proposed also on blown film extrusion lines with extraordinary performance and a perfect flow continuity also on single layer lines with product thicknesses up to 10 microns. A careful engineering of the venting channels, as well as the filtration chamber, has generated the achievement of these results. A simple and effective sealing system with interchangeable components allows even complex maintenance at the customer site, minimizing downtime and costs. Double-piston continuous screen changer realizes a non-stopping screen changing operation by altering two pistons with double filtering areas. During production, the polymer melt is divided into two flow channels inside the screen changer housing, and then conveyed through the two filters equipped with the appropriate filter medium. This filter medium consists of screen packs supported by breaker plates.Features:
It matches with extruders of different design. It is applicable to process most polymers at high output.
Double-channel nonstop screen changer work alternatively, which can change the screen with minimum melt pressure fluctuating and production interrupting.
Two stages air vent for the hydraulic system to eliminate bubbling in polymer flow, thus eliminate the defects on final products.
Superior sealing system completely eliminates polymer leakage.
External safety cover gives better appearance and safe protection.
It is equipped with circular,elongated or U- shaped screens, for enlarged filtration area.
AJSZ series is consist of
- The main body of the screen changer
- Hydraulic unit
- Electrical controlling pack (Opitonal)
- PLC Controller (Opitonal)
- Support Frame (Opitonal)
- Adapters and connection flanges (Opitonal)
- filter mesh/screen (Opitonal)
- Anji Melt Pump (Opitonal)
Product Parameters
Packaging & Shipping
Anji will choose the most reasonable packing material and packing dimensions for our product, all wooden case package is fumigated, and dimensions are designed to be economical to container shipment. For shipping, we usually work on FOB/CFR/CIF. We will supply related report and packing pictures of products before shipment to customers.
Company Profile
About Us
ANJI HENANPLASTIC MACHINERY CO., LTD was established in 1992 based in Zhengzhou, Henan Province, China. For more than 30 years, Anji has been dedicated to the R&D, manufacturing, and industry promotion of polymer melt filtration systems and melt pumps. Today Anji proudly owns a team 80 employers, mostly highly skilled workers with rich experience in the design, manufacturing, and applications of screen changers and melt pumps for polymer extrusion industry.
Our products were exported to Singapore, India, Thailand, Korea, Malaysia, Japan, Philippines, Indonesia, UAE, Iran, South Africa, UK, Germany, Turkey, Spain, Bulgaria, Italy, Slovenia, Argentina, Peru, Colombia, Mexico, USA, Russia, and Australia, etc. Anji Plastic Machinery Manufactory focuses on the research and application of polymer melt filtration technology, from manual operation hydraulical operation to PLC programmable, continuously adopted the state-of-the-art technology, to provide reliable and leak-free processing.
Anji Screen Changers ( Melt Filter) improve the quality of the polymer products by removing contaminants and defective solids in polymer melt. Screen Changer can be fitted to any new or existing extruder, melt pump, reactor or any extrusion line in plastics extrusion processing: the resin granulation process after polymerization, engineering polymer compounding, pelletizing, plastic recycling granulator, blown and cast film extrusion, sheet extrusion, pipe and profile extrusion, spun-bonded and melt-blown nonwovens, etc.
After Sales Service
Commissioning
We provide the operation manual for customers to gudie to install the screen changer, and at the requirement of user, salers should send technician to install and commissioning the die at site of Buyers, expenses of the trip should be borne by Buyers.
After-sales service
12 months with proper operation by user, all the spare parts shall be replaced free of charge under guarantee period, fee for transportation and packing will be borne by users
Certifications
FAQ
What is screen changer?
Screen changer includes one or more filter devices. When the polymer fluid flow enters the filter device, the contaminants in the melt is blocked in one side of the filter. The filter is supported by a breaker plate, while the breaker plates are installed in the support carriage; support carriage parts can move, stay in the work place or non-working position.
Screen changer is available supporting the device as following: extruder, melt pump, reactor or other extrusion lines. It can be used to filter any type of polymer and thermoplastic.
Why you need melt filtration device?
As quality specifications become tighter and the need to use more recycled materials becomes more prominent, more and more extrusion processors are examining their options in melt-filtration technology. There are three basic reasons why you need melt filtration:
1. Product quality specifications mandate visual or mechanical properties that cannot be maintained without filtration.
2. Downstream equipment may become damaged by contaminants in the melt.
3. Additional melt pressure is needed to improve melt quality.
It is likely that most extrusion processors will fit into one of the above categories, and that they will find a simple breaker plate unsatisfactory due to the time required disassembling and reassembling the device. The alternatives considered here are various types of screen changers, though other types of filters may be used for special purposes, like high output rates and very tight filtration requirements.
Common uses for screen changers are:
Bulk polymer production from a reactor i.e. producing pellets.
Extrusion lines for compounding polymers, blown film, cast film, sheet, pipes, profiles, plastics recycling.
Different types of Screen Changers are available, to cater for different applications and process requirements. Manual type or slow speed screen changers require the production line to be stopped for a short time to enable the filter to be changed, other types, operating at high speed, can change filter without stopping or slowing down the extrusion process.
For the production of blow film, sheet, pipes, etc, continuous flow screen changers are the most suitable type as the melt continues to flow during a screen change.
Each type of Screen Changer is available in different sizes, to cater for different output requirements. Anji Screen Changers are available from 30mm diameter for polymer outputs of 100 kg/h to the massive Extended Area for outputs up to 60,000 kg/h. For new or existing lines, Anji can design and manufacture adaptors, which may be required to connect the Screen Changer to the rest of the line.
How to choose a suitable screen changer?
As for screen changer, we need to be told as follow:
1. What is the processed material, PP/PE/ABS/PET? Is it new material or reclaim material?
2. Is the extruder single screw or twin screw? What size is the screw diameter?
3. Production capacity (Kg/h)? Max operating pressure?
4. What is the finial products, plastic pipe or sheet, pellets?
5. Do you require continuous or discontinuous process?
According to the technical feedback, we will suggest that screen changer more suitable your processing requirement.
What are the benifits of screen changer on extruder?
1. Improve the quality of the final products
2. Greatly improve the plasticizing of the raw material
3. Make the product structure more homogeneous and product surface smoothness
4. Protect the down stream equipments, such as ANJI melt pumps and the extrusion dies
What are the benifits of melt pump on extruder?
1.To improve the stability of the product size
2. Melting quality control
3. Increase output
4. Reduce the raw materil consumption
5. Improve the flexible of the extruder
6. Protect the extrusion die ,extend the service life of the extruder
What are the benifits of installation the screen changer and melt gear pump together?
1. Improve the melt plasticaction
2. Improve the quality of the products
3. Extend the service life of the extruder
4. Greatly increase the output of the products
5. Reduce the labor interference
6. Reduce the unqualified products
What do we need to pay attention when using the screen changer nad melt pump?
1. We should operate the screen changer and melt gear pump as the safety manual, prevent an electrical shock
2. To prevent ourself scald
3.Do not disassemble the screen changer and the melt gear pump, any questions, please contact with the supplier
Address:
No.62 Huayuan North Road, Jinshui District, Zhengzhou, Henan, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Health & Medicine, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9001
Company Introduction:
ANJI HENANPLASTIC MACHINERY Co., Ltd was established in 1992 based in Jiaozuo, Henan Province, China. For more than 30 years, Anji has been dedicated to the R&D, manufacturing, and industry promotion of polymer melt filtration systems and melt pumps. Today Anji proudly owns a team 80 employers, mostly highly skilled workers with rich experience in the design, manufacturing, and applications of screen changers and melt pumps for polymer extrusion industry.
Our products were exported to Singapore, India, Thailand, Korea, Malaysia, Japan, Philippines, Indonesia, UAE, Iran, South Africa, UK, Germany, Turkey, Spain, Bulgaria, Italy, Slovenia, Argentina, Peru, Colombia, Mexico, USA, Russia, and Australia, etc.
Anji Plastic Machinery Manufactory focuses on the research and application of polymer melt filtration technology, from manual operation hydraulical operation to PLC programmable, continuously adopted the state-of-the-art technology, to provide reliable and leak-free processing.
Anji Screen Changers ( Melt Filter) improve the quality of the polymer products by removing contaminants and defective solids in polymer melt. Screen Changer can be fitted to any new or existing extruder, melt pump, reactor or any extrusion line in plastics extrusion processing: The resin granulation process after polymerization, engineering polymer compounding, pelletizing, plastic recycling granulator, blown and cast film extrusion, sheet extrusion, pipe and profile extrusion, spun-bonded and melt-blown nonwovens, etc.
